1110155 – UNO2-PS/1AC/48DC/240W – BỘ NGUỒN UNO2 1 PHA 10A – PHOENIX CONTACT – TIENHUNGTECH

Mã sản phẩm:
1110155 - UNO2-PS/1AC/48DC/240W

Tình trạng hàng:

Còn hàng

Xuất xứ:

Đức

Liên hệ để có giá tốt nhất:
Mr Vũ: 0908 878 633
Mr Hoàng: 0933 441 466
Mr Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com

Mô tả sản phẩm

BỘ NGUỒN 10A – UNO2-PS/1AC/48DC/240W – 1110155 – POWER SUPPLY – PHOENIX CONTACT. NHÀ PHÂN PHỐI PHOENIX CONTACT VIỆT NAM.
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 48 V DC / 5 A

Tham khảo catalog chi tiết theo đường link sau ( trích nguồn https://www.phoenixcontact.com):
https://www.phoenixcontact.com

Chia sẻ sản phẩm

Thông tin kỹ thuật
Tải catalog

Supply system configuration Star network (TN, TT, IT (PE))
Nominal input voltage range 100 V AC … 240 V AC
Input voltage range 100 V AC … 240 V AC -15 % … +10 %
Derating < 90 V AC (1 %/V) Typical national grid voltage 120 V AC 230 V AC Voltage type of supply voltage AC Inrush current typ. 10 A (at 25 °C) Inrush current integral (I2t) < 0.05 A2s Frequency range (fN) 50 Hz ... 60 Hz ±10 % Mains buffering time typ. 20 ms (120 V AC) typ. 20 ms (230 V AC) Current consumption 2.6 A (100 V AC) 2.2 A (120 V AC) 1.16 A (230 V AC) 1.2 A (240 V AC) Protective circuit Transient surge protection; Varistor, gas-filled surge arrester Switch-on time typ. 530 ms Device mains fuse 5 A internal (device protection), fast-blow Recommended breaker for input protection 10 A ... 16 A (Characteristic B, C, D, K or comparable) Discharge current to PE < 3.5 mA Efficiency typ. 91.5 % (120 V AC) typ. 93 % (230 V AC) Nominal output voltage 48 V DC Setting range of the output voltage (USet) 42 V DC ... 56 V DC (≥48 V DC, constant capacity restricted<48 V DC, constant current restricted) Nominal output current (IN) 5 A Short-circuit-proof yes No-load proof yes Crest factor typ. 1.637 (120 V AC) typ. 1.54 (230 V AC) Output power (PN) 240 W Connection in parallel yes, for increased efficiency and redundancy Connection in series yes, for increased output voltage Feedback voltage resistance ≤ 60 V DC Protection against overvoltage at the output (OVP) ≤ 60 V DC Residual ripple typ. 50 mVPP (with nominal values) Control deviation < 1 % (change in load, static 10 % ... 90 %) < 3 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Rise time < 1 s (UOut = 10 % ... 90 %) Minimum no-load power dissipation < 2.9 W (120 V AC) Maximum no-load power dissipation < 3 W (230 V AC) Minimum nominal load power dissipation < 37 W (120 V AC) Power loss nominal load max. < 28 W (230 V AC)