2904605 – QUINT4-PS/1AC/12DC/2.5/PT – BỘ NGUỒN QUINT4 1 PHA 2.5A – PHOENIX CONTACT – TIENHUNGTECH

Mã sản phẩm:
2904605 - QUINT4-PS/1AC/12DC/2.5/PT

Tình trạng hàng:

Còn hàng

Xuất xứ:

Đức

Liên hệ để có giá tốt nhất:
Mr Vũ: 0908 878 633
Mr Hoàng: 0933 441 466
Mr Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com

Mô tả sản phẩm

BỘ NGUỒN QUINT4 PHOENIX CONTACT 1 PHA 2.5A – 2904605 – QUINT4-PS/1AC/12DC/2.5/PT – POWER SUPPLY – PHOENIX CONTACT. NHÀ PHÂN PHỐI PHOENIX CONTACT VIỆT NAM.Primary-switched power supply unit QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 2.5 A

Tham khảo catalog chi tiết theo đường link sau ( trích nguồn https://www.phoenixcontact.com):
https://www.phoenixcontact.com

Chia sẻ sản phẩm

Thông tin kỹ thuật
Tải catalog

AC operation
Input voltage range 100 V AC … 240 V AC -15 % … +10 %
Electric strength, max. 300 V AC 60 s
Typical national grid voltage 120 V AC
230 V AC
Voltage type of supply voltage AC/DC
Inrush current typ. 11.3 A (at 25 °C)
Inrush current integral (I2t) < 0.1 A2s Inrush current limitation < 11.3 A Frequency range (fN) 50 Hz ... 60 Hz -10 % ... +10 % Mains buffering time typ. 54 ms (120 V AC) typ. 54 ms (230 V AC) Current consumption 0.44 A (100 V AC) 0.35 A (120 V AC) 0.19 A (230 V AC) 0.2 A (240 V AC) Nominal power consumption 32.8 VA Protective circuit Transient surge protection; Varistor Typical response time 500 ms Input fuse 3.15 A (slow-blow, internal) Recommended breaker for input protection 6 A ... 16 A (Characteristic B, C or comparable) Discharge current to PE < 0.25 mA (264 V AC, 60 Hz) < 0.16 mA DC operation Input voltage range 110 V DC ... 250 V DC -20 % ... +40 % Voltage type of supply voltage AC/DC Current consumption 0.4 A (110 V DC) 0.17 A (250 V DC) Efficiency typ. 89.5 % (120 V AC) typ. 90.9 % (230 V AC) Nominal output voltage 12 V DC Setting range of the output voltage (USet) 12 V DC ... 15 V DC (constant capacity) Nominal output current (IN) 2.5 A Static Boost (IStat.Boost) 3.125 A (≤ 40 °C) Dynamic Boost (IDyn.Boost) 4.5 A (≤ 60 °C (5 s)) Feedback voltage resistance ≤ 25 V DC Protection against overvoltage at the output (OVP) ≤ 18 V DC Control deviation < 0.2 % (Static load change 10 % ... 90 %) < 2 % (Dynamic load change 10 % ... 90 %, (10 Hz)) < 0.1 % (change in input voltage ±10 %) Residual ripple < 30 mVPP (with nominal values) Short-circuit-proof yes No-load proof yes Output power 30 W 38 W 54 W Maximum no-load power dissipation < 0.4 W (230 V AC) < 0.5 W (120 V AC) Power loss nominal load max. < 3.5 W (120 V AC) < 3 W (230 V AC) Crest factor typ. 1,89 (120 V AC) typ. 1,97 (230 V AC) Rise time 50 ms (UOut = 10 % ... 90 %) Connection in parallel yes, for redundancy and increased capacity Connection in series yes