2903159 – TRIO-PS-2G/1AC/48DC/5 – BỘ NGUỒN TRIO 1 PHA 5A – PHOENIX CONTACT – TIENHUNGTECH

AC operation
Network type Star network
Nominal input voltage range 100 V AC … 240 V AC
Input voltage range 100 V AC … 240 V AC -15 % … +10 %
Electric strength, max. ≤ 300 V AC 15 s
Typical national grid voltage 120 V AC
230 V AC
Voltage type of supply voltage AC/DC
Inrush current integral (I2t) < 0.3 A2s Inrush current limitation 15 A (after 1 ms) AC frequency range 50 Hz ... 60 Hz ±10 % Frequency range (fN) 50 Hz ... 60 Hz ±5 Hz Mains buffering time typ. 15 ms (120 V AC) typ. 15 ms (230 V AC) Current consumption 2.9 A (100 V AC) 2.3 A (120 V AC) 1.2 A (230 V AC) 1.2 A (240 V AC) Nominal power consumption 285.7 VA Power factor (cos phi) 0.91 Input fuse 6.3 A (internal (device protection)) Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K) Discharge current to PE < 3.5 mA < 1.7 mA (264 V AC, 60 Hz) POWER factor > 0.9 (120 V AC)
> 0.9 (230 V AC)
DC operation
Nominal input voltage range 110 V DC … 250 V DC
Input voltage range 110 V DC … 250 V DC ±10 %
Extended input voltage range in operation > 88 V DC (Derating <99 V DC: 2 %/V) Derating < 99 V DC (2 %/V) Switch-on voltage 90 V DC Shut-down voltage 70 V DC Voltage type of supply voltage AC/DC Mains buffering time > 20 ms (230 V AC)
Current consumption 2.5 A (110 V DC)
1.1 A (250 V DC)
Efficiency typ. 90.5 % (120 V AC)
typ. 91 % (230 V AC)
Output characteristic U/I with dynamic load reserve
Nominal output voltage 48 V DC ±1 %
Setting range of the output voltage (USet) 36 V DC … 55 V DC (> 48 V DC, constant capacity restricted)
Nominal output current (IN) 5 A
Dynamic Boost (IDyn.Boost) 7.5 A (5 s)
Derating > 60 °C … 70 °C (2.5%/K)
POWER factor > 0.9 (120 V AC)
> 0.9 (230 V AC)
Feedback voltage resistance ≤ 60 V DC
Protection against overvoltage at the output (OVP) ≤ 60 V DC
Control deviation < 1 % (change in load, static 10 % ... 90 %) < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) < 0.1 % (change in input voltage ±10 %) Residual ripple < 20 mVPP (with nominal values) Short-circuit-proof yes No-load proof yes Output power 240 W 360 W Peak switching voltages nominal load < 15 mVPP Maximum no-load power dissipation typ. 4 W (120 V AC) typ. 4.1 W (230 V AC) Power loss nominal load max. typ. 24.5 W (120 V AC) typ. 20.1 W (230 V AC) Short-circuit current < 7 A DC (Permanent) Rise time 20 ms (UOUT (10 % ... 90 %)) Connection in parallel yes, for redundancy and increased capacity Connection in series yes Signal: DC OK Continuous load current 100 mA