2866734 – QUINT-PS/3AC/24DC/ 5 – BỘ NGUỒN QUINT 3PHA 5A – PHOENIX CONTACT
- Thông tin kỹ thuật
- Tải catalog
- Hình ảnh thực tế
| AC operation | |
| Nominal input voltage range | 3x 400 V AC … 500 V AC |
| Input voltage range | 3x 320 V AC … 575 V AC |
| 2x 360 V AC … 575 V AC | |
| 450 V DC … 800 V DC | |
| Voltage type of supply voltage | AC/DC |
| Inrush current | < 15 A (typical) |
| Inrush current integral (I2t) | < 1 A2s |
| AC frequency range | 45 Hz … 65 Hz |
| Frequency range DC | 0 Hz |
| Mains buffering time | > 20 ms (400 V AC) |
| > 30 ms (500 V AC) | |
| Current consumption | 3x 0.8 A (400 V AC) |
| 3x 0.7 A (500 V AC) | |
| 0.2 A (600 V DC) | |
| Nominal power consumption | 268 VA |
| Protective circuit | Transient surge protection; Varistor, gas-filled surge arrester |
| Power factor (cos phi) | 0.5 |
| Typical response time | < 0.06 s |
| Permissible backup fuse | B6 B10 B16 AC: |
| Permissible DC backup fuse | DC: Connect a suitable fuse upstream |
| Recommended breaker for input protection | 6 A … 16 A (AC: Characteristics B, C, D, K) |
| Discharge current to PE | < 3.5 mA |
| Efficiency | > 89 % (at 400 V AC and nominal values) |
| Output characteristic | U/I |
| Nominal output voltage | 24 V DC ±1 % |
| Setting range of the output voltage (USet) | 18 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted) |
| Nominal output current (IN) | 5 A (-25 °C … 60 °C, UOUT = 24 V DC) |
| POWER BOOST (IBoost) | 7.5 A (-25 °C … 40 °C permanent, UOUT = 24 V DC ) |
| Selective Fuse Breaking (ISFB) | 30 A (12 ms) |
| Magnetic circuit breaker tripping | B2 / B4 / C2 |
| Derating | 60 °C … 70 °C (2.5%/K) |
| Feedback voltage resistance | max. 35 V DC |
| Protection against overvoltage at the output (OVP) | < 35 V DC |
| Residual ripple | < 20 mVPP (with nominal values) |
| Output power | 120 W |
| Peak switching voltages nominal load | < 20 mVPP (at nominal values, 20 MHz) |
| Maximum no-load power dissipation | 4 W |
| Power loss nominal load max. | 14 W |
| Rise time | < 0.04 s (UOUT (10 % … 90 %)) |
| Connection in parallel | yes, for redundancy and increased capacity |
| Connection in series | yes |
Bạn đang cần tư vấn?
Tiến Hưng luôn hỗ trợ 24/7








