1110466 – UNO2-PS/1AC/24DC/120W – BỘ NGUỒN UNO2 1 PHA 5A – PHOENIX CONTACT – TIENHUNGTECH

Supply system configuration Star network (TN, TT, IT (PE))
Nominal input voltage range 100 V AC … 240 V AC
Input voltage range 100 V AC … 240 V AC -15 % … +10 %
Derating < 100 V AC (1 %/V) Typical national grid voltage 120 V AC 230 V AC Voltage type of supply voltage AC Inrush current typ. 35 A (at 25 °C) Inrush current integral (I2t) < 0.7 A2s Frequency range (fN) 50 Hz ... 60 Hz ±10 % Mains buffering time typ. 25 ms (120 V AC) typ. 25 ms (230 V AC) Current consumption 1.34 A (100 V AC) 1.1 A (120 V AC) 0.59 A (230 V AC) 0.57 A (240 V AC) Protective circuit Transient surge protection; Varistor Switch-on time typ. 1 s Device mains fuse 3.15 A internal (device protection), fast-blow Recommended breaker for input protection 6 A ... 16 A (Characteristic B, C, D, K or comparable) Discharge current to PE < 0.25 mA Efficiency typ. 93 % (120 V AC) typ. 94 % (230 V AC) Nominal output voltage 24 V DC Setting range of the output voltage (USet) 24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN) 5 A
Short-circuit-proof yes
No-load proof yes
Crest factor typ. 1,93 (120 V AC)
typ. 2,05 (230 V AC)
Output power (PN) 120 W
Connection in parallel yes, for increasing power and redundancy with diode
Connection in series yes, for increased output voltage
Feedback voltage resistance ≤ 35 V DC
Protection against overvoltage at the output (OVP) ≤ 35 V DC
Residual ripple typ. 70 mVPP (with nominal values)
Control deviation < 1 % (change in load, static 10 % ... 90 %) < 3 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Rise time < 1 s (UOut = 10 % ... 90 %) Minimum no-load power dissipation < 0.4 W (120 V AC) Maximum no-load power dissipation < 0.75 W (230 V AC) Minimum nominal load power dissipation < 9 W (120 V AC) Power loss nominal load max. < 7.5 W (230 V AC)