SAFETY RELAY PHOENIX PSR-PC40-2NO-1DO-24DC-SP – 2700589
- Technical information
- Download catalog
| Maximum power dissipation for nominal condition | 5.5 W (IL² = 60 A²) |
| Nominal operating mode | 100% operating factor |
| Air clearances and creepage distances between the power circuits | |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage/insulation | Safe isolation, 6 kV reinforced insulation from control circuit, start circuit, signal output to the enabling current paths, 4 kV/basic insulation between the enabling current paths and between all current paths and housing |
| Supply | |
| Designation | A1/A2 |
| Rated control circuit supply voltage US | 20.4 V DC … 26.4 V DC |
| Rated control circuit supply voltage US | 24 V DC -15 % / +10 % (A1/A2) |
| Rated control supply current IS | typ. 75 mA (depending on load M1 +100 mA) |
| Power consumption at US | typ. 1.8 W |
| Inrush current | typ. 400 mA (Δt < 100 µs at Us) |
| Filter time | max. 2 ms (at A1-A2; test pulse width) |
| ≥ 100 ms (at A1-A2; test pulse rate) | |
| Protective circuit | Serial protection against polarity reversal; 33 V suppressor diode |
Are you in need of advice?
Tien Hung always supports 24/7






