SAFETY RELAY PHOENIX PSR-M-TBUS1-PI – 1105096
- Technical information
- Download catalog
| Maximum power dissipation for nominal condition | 0.5 W |
| Nominal operating mode | 100% operating factor |
| Interfaces | DIN rail TBUS for connection to the master module, supplied as standard |
| Air clearances and creepage distances between the power circuits | |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage/insulation | Basic insulation 4 kV between all current paths and housing |
| Brake to be connected | |
| Connection method | Push-in connection |
| Supply | |
| Designation | A1/A2 |
| Rated control circuit supply voltage US | 19.2 V DC … 28.8 V DC |
| Rated control circuit supply voltage US | 24 V DC -20 % / +20 % (provide external protection, typically 1 A) |
| Rated control supply current IS | typ. 21 mA (at US) |
| Power consumption at US | typ. 0.5 W |
| Inrush current | max. 8 A (Δt = 200 µs at Us) |
| Filter time | typ. 20 ms (in the event of voltage dips at Us) |
| Protective circuit | Serial protection against polarity reversal |
| Varistor | |
Are you in need of advice?
Tien Hung always supports 24/7






