1088494 – STEP3-PS/1AC/24DC/1.3/PT – STEP 1 PHASE 1.3A POWER SUPPLY – PHOENIX CONTACT – TIENHUNGTECH

Product code:
1088494 - STEP3-PS/1AC/24DC/1.3/PT

Item status:

In stock

Origin:

Germany

Contact for best price:
Mr Vu: 0908 878 633
Mr. Hoang: 0933 441 466
Mr. Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com

Product Description

STEP 1088494 – STEP3-PS/1AC/24DC/1.3/PT POWER SUPPLY – PHOENIX CONTACT. DISTRIBUTOR OF PHONEIX CONTACT VIETNAM. MADE IN THAILAND.

Distributor Phoenix Contact Ho Chi Minh, Vietnam. STEP power supply single phase AC input, output 24VDC/1.3A, 11088494 – STEP3-PS/1AC/24DC/1.3/PT, plastic housing, mountable on DIN rail. The output voltage range is adjustable from 22VDC to 27VDC. MANUFACTURED IN THAILAND.
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 1.3 A

Refer to the detailed catalog at the following link (source https://www.phoenixcontact.com):

https://www.phoenixcontact.com

Share products

Technical information
Download catalog

Supply system configuration Star network (TN, TT, IT (PE))
Input voltage range 100 V AC … 240 V AC -15 % … +10 %
Typical national grid voltage 120 V AC
230 V AC
Voltage type of supply voltage AC/DC
Inrush current typ. 22 A
Inrush current integral (I2t) typ. 0.27 A2s
Frequency range (fN) 50 Hz … 60 Hz ±10 %
Mains buffering time typ. 20 ms (120 V AC)
typ. 100 ms (230 V AC)
Current consumption 0.59 A (100 V AC)
0.33 A (240 V AC)
Protective circuit Transient surge protection; Varistor
Switch-on time typ. 2 s
Device mains fuse 2 A internal (device protection), slow-blow
Recommended breaker for input protection 6 A … 16 A (Characteristics B, C, D, K)
Discharge current to PE < 0.25 mA Input voltage range 110 V DC … 250 V DC -20 % … +40 % Current consumption 0.31 A (110 V DC) 0.13 A (250 V DC) Efficiency > 87.5 % (120 V AC)
> 88.5 % (230 V AC)
Efficiency Level VI
Nominal output voltage 24 V DC
Nominal output current (IN) 1.3 A
Short-circuit-proof yes
No-load proof yes
Derating > 50 °C … 70 °C (2 % / K)
Crest factor typ. 3,45
typ. 4,32
Output power (PN) 30 W
Connection in parallel yes, for increasing power and redundancy with diode
Connection in series yes, for increased output voltage
Feedback voltage resistance ≤ 35 V DC
Protection against overvoltage at the output (OVP) < 35 V DC
Residual ripple typ. 100 mVPP
Control deviation < 0.5 % (Static load change 10 % … 90 %)
< 3 % (Dynamic load change 10 % … 90 %, (10 Hz))
< 0.1 % (change in input voltage ±10 %)
Rise time typ. 100 ms (UOut = 10 % … 90 %)
Minimum no-load power dissipation < 0.1 W (120 V AC)
Maximum no-load power dissipation < 0.1 W (230 V AC)
Minimum nominal load power dissipation < 4.4 W (120 V AC)
Power loss nominal load max. < 3.9 W (230 V AC)