2866268 – TRIO-PS/1AC/24DC/ 2.5 – BỘ NGUỒN TRIO 1PHA 2.5A – PHOENIX CONTACT – TIENHUNGTECH

Product code:
2866268 - TRIO-PS/1AC/24DC/ 2.5

Item status:

In stock

Origin:

Germany

Liên hệ để có giá tốt nhất:
Mr Vũ: 0908 878 633
Mr Hoàng: 0933 441 466
Mr Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com

Product Description

BỘ NGUỒN TRIO 1PHA 2.5A 2866268 – TRIO-PS/1AC/24DC/ 2.5 POWER SUPPLY – PHOENIX CONTACT. NHÀ PHÂN PHỐI PHOENIX CONTACT VIỆT NAM. MADE IN THAILAND

Nhà phân phối Phoenix Contact Hồ Chí Minh, Việt Nam. Bộ nguồn Quint đầu vào 1 pha AC, đầu ra 24VDC/2.5A, mã hàng 2866268 – TRIO-PS/1AC/24DC/ 2.5, vỏ kim loại, gắn được trên thanh DIN rail. Dải điện áp đầu ra có thể điều chỉnh được từ 22.5VDC đến 29.5VDC, công nghệ power boost cho phép ổn định dòng ra cực chính xác. SẢN XUẤT TẠI THÁI LAN.
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/2.5 A
Tham khảo catalog chi tiết theo đường link sau ( trích nguồn https://www.phoenixcontact.com):
https://www.phoenixcontact.com

Share products

Technical information
Download catalog
Photo realistic

AC operation
Nominal input voltage range	100 V AC … 240 V AC
Input voltage range	85 V AC … 264 V AC (Derating < 90 V AC: 2,5 %/V)
Derating	< 90 V AC (2.5 %/V)
Input voltage range AC	85 V AC … 264 V AC (Derating < 90 V AC: 2,5 %/V)
Electric strength, max.	300 V AC
Voltage type of supply voltage	AC
Inrush current	< 15 A
Inrush current integral (I²t)	0.5 A²s
AC frequency range	45 Hz … 65 Hz
Mains buffering time	> 20 ms (120 V AC)
Mains buffering time	> 100 ms (230 V AC)
Current consumption	0.95 A (120 V AC)
Current consumption	0.5 A (230 V AC)
Nominal power consumption	97 VA
Protective circuit	Transient surge protection; Varistor
Power factor (cos phi)	0.72
Typical response time	< 1 s
Input fuse	2 A (slow-blow, internal)
Permissible backup fuse	B6 B10 B16
Recommended breaker for input protection	6 A … 16 A (Characteristics B, C, D, K)
Discharge current to PE	< 3.5 m

Efficiency	86 % (for 230 V AC and nominal values)
Output characteristic	U/I
Nominal output voltage	24 V DC ±1 %
Setting range of the output voltage (U_Set)	22.5 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (I_N)	2.5 A (U_OUT = 24 V DC)
Derating	55 °C … 70 °C (2.5%/K)
Feedback voltage resistance	35 V DC
Protection against overvoltage at the output (OVP)	< 35 V DC
Max. capacitive load	unlimited
Active current limitation	Approx. 5 A (for short-circuit)
Control deviation	< 1 % (change in load, static 10 % … 90 %)
	< 2 % (change in load, dynamic 10 % … 90 %)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 30 mV_PP
Output power	60 W
Peak switching voltages nominal load	< 20 mV_PP
Maximum no-load power dissipation	0.8 W
Power loss nominal load max.	10 W
Rise time	< 2 ms (U_OUT (10 % … 90 %))
Connection in parallel	yes, for redundancy and increased capacity
Connection in series	yes