2866682 – QUINT-PS/1AC/48DC/10 – BỘ NGUỒN QUINT 1PHA 3A – PHOENIX CONTACT

Product code:
2866682 - QUINT-PS/1AC/48DC/10

Item status:

In stock

Origin:

Germany

Liên hệ để có giá tốt nhất:
Mr Vũ: 0908 878 633
Mr Hoàng: 0933 441 466
Mr Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com

Product Description

BỘ NGUỒN QUINT 1PHA 3A – 2866682 – QUINT-PS/1AC/48DC/10 POWER SUPPLY – PHOENIX CONTACT. NHÀ PHÂN PHỐI PHOENIX CONTACT VIỆT NAM. MADE IN THAILAND

Nhà phân phối Phoenix Contact Hồ Chí Minh, Việt Nam. Bộ nguồn Quint đầu vào 1 pha AC, đầu ra 48VDC/10A, mã hàng 2866682 – QUINT-PS/1AC/48DC/10, vỏ kim loại, gắn được trên thanh DIN rail. Dải điện áp đầu ra có thể điều chỉnh được từ 30VDC đến 56VDC, công nghệ power boost cho phép ổn định dòng ra cực chính xác. SẢN XUẤT TẠI THÁI LAN.

Tham khảo catalog chi tiết theo đường link sau ( trích nguồn https://www.phoenixcontact.com)
https://www.phoenixcontact.com

https://tienhungtech.com/

Share products

Technical information
Download catalog

AC operation
Nominal input voltage range	100 V AC … 240 V AC
Input voltage range	85 V AC … 264 V AC
Input voltage range	90 V DC … 350 V DC (UL 508: ≤ 250 V DC)
Input voltage range AC	85 V AC … 264 V AC
Input voltage range DC	90 V DC … 350 V DC (UL 508: ≤ 250 V DC)
Electric strength, max.	300 V AC
Voltage type of supply voltage	AC/DC
Inrush current	< 20 A (typical)
Inrush current integral (I²t)	< 3.2 A²s
AC frequency range	45 Hz … 65 Hz
Frequency range DC	0 Hz
Mains buffering time	> 20 ms (120 V AC)
Mains buffering time	> 20 ms (230 V AC)
Current consumption	5.1 A (120 V AC)
	2.3 A (230 V AC)
	4.8 A (110 V DC)
	2.4 A (220 V DC)
Nominal power consumption	572 VA
Protective circuit	Transient surge protection; Varistor
Typical response time	< 1 s
Input fuse	12 A (slow-blow, internal)
Permissible backup fuse	B10 B16 AC:
Permissible DC backup fuse	DC: Connect a suitable fuse upstream
Recommended breaker for input protection	10 A … 16 A (AC: Characteristics B, C, D, K)
Discharge current to PE	< 3.5 mA

Efficiency	> 93 % (for 230 V AC and nominal values)
Output characteristic	U/I
Nominal output voltage	48 V DC ±1 %
Setting range of the output voltage (U_Set)	30 V DC … 56 V DC (> 48 V DC, constant capacity restricted)
Nominal output current (I_N)	10 A (-25 °C … 60 °C, U_OUT = 48 V DC)
POWER BOOST (I_Boost)	13 A (-25 °C … 40 °C permanent, U_OUT = 48 V DC )
Selective Fuse Breaking (I_SFB)	60 A (12 ms)
Magnetic circuit breaker tripping	B2 / B4 / B6 / C2 / C4
Derating	60 °C … 70 °C (2.5%/K)
Feedback voltage resistance	max. 60 V DC
Protection against overvoltage at the output (OVP)	< 60 V DC
Active current limitation	I_BOOST = 13 A (for short-circuit), approximately
Control deviation	< 1 % (change in load, static 10 % … 90 %)
	< 2 % (change in load, dynamic 10 % … 90 %)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 80 mV_PP (with nominal values)
Output power	480 W
Maximum no-load power dissipation	16 W
Power loss nominal load max.	41 W
Rise time	< 0.5 ms (U_OUT (10 % … 90 %))
Connection in parallel	yes, for redundancy and increased capacity
Connection in series	yes
Signal: DC OK active
Output description	U_OUT > 0.9 x U_N: High signal
Switching voltage range	18 V DC … 24 V DC
Maximum inrush current	≤ 20 mA (short-circuit-proof)
Continuous load current	≤ 20 mA