SAFETY RELAY PHOENIX PSR-SPP- 24DC/TS/SDI8/SDIO4 – 2986041
- Technical information
- Download catalog
Product type | Safety device |
Application | PSR-TRISAFE-M extension module |
Insulation characteristics: Air clearances and creepage distances between the power circuits | |
Overvoltage category | III |
Pollution degree | 2 |
Times | |
Response time | max. 30 ms (plus response time of PSR-TS-SDOR4) |
Recovery time | < 10 s |
Maximum power dissipation for nominal condition | 2323 mW (at f = 8, g = 2, h =4, Iclock = 50 mA, IOUT/GND = 500 mA) |
Nominal operating mode | 100% operating factor |
Interfaces | DIN rail TBUS for connection to the master module, supplied as standard |
Supply | |
Rated control circuit supply voltage US | 18 V DC … 30 V DC (Incl. all tolerances, incl. residual ripple) |
Rated control circuit supply voltage US | 24 V DC (Electrical supply via PSR-TBUS) |
Rated control supply current IS | Electrical supply via PSR-TBUS |
typ. 51.6 mA (No inputs or outputs set, A1/A2 open) | |
typ. 66 mA (All inputs and safe outputs set) | |
Filter time | typ. 20 ms (Load-dependent, in the event of voltage dips at US) |
Protective circuit | Yes, within the scope of the operating voltage limits |
Status display | 1 x green LED, 1 x red LED |
Are you in need of advice?