SAFETY RELAY PHOENIX PSR-M-EF5-SDO4-2A-DO8-SC – 1104976
- Technical information
- Download catalog
| Maximum power dissipation for nominal condition | 8.05 W (with max. permissible load) |
| Nominal operating mode | 100% operating factor |
| Interfaces | DIN rail TBUS for connection to the master module, supplied as standard |
| Air clearances and creepage distances | |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage/insulation | Basic insulation 4 kV between 24 V power supply and I/Os to the housing |
| Supply | |
| Designation | A1/A2 |
| Rated control circuit supply voltage US | 19.2 V DC … 28.8 V DC |
| Rated control circuit supply voltage US | 24 V DC -20 % / +20 % (provide external protection, typically 5 A) |
| Rated control supply current IS | typ. 25 mA (Outputs inactive) |
| typ. 60 mA (Outputs active, without load) | |
| Power consumption at US | typ. 0.6 W (Outputs inactive) |
| max. 1.44 W (Outputs active, without load) | |
| Inrush current | 2 A (Δt < 1 ms at Us) |
| Filter time | typ. 5 ms (in the event of voltage dips at Us) |
| Protective circuit | Inverse-parallel protection against polarity reversal |
| Supply | |
| Designation | 24V/A2 |
| Rated control circuit supply voltage US | 24 V DC -20 % / +20 % (provide external protection, typically 5 A) |
| Rated control supply current IS | < 0.5 mA (Outputs inactive) |
| max. 20 mA (Outputs active, without load) | |
| Power consumption at US | < 12 mW (Outputs inactive) |
| max. 0.48 W (Outputs active, without load) | |
| Inrush current | 10 A (Δt = 1 ms at Us) |
| Filter time | typ. 1 ms (in the event of voltage dips) |
Are you in need of advice?
Tien Hung always supports 24/7






