2910105 – UNO2-PS/1AC/24DC/480W – BỘ NGUỒN UNO 1 PHA 20A – PHOENIX CONTACT – TIENHUNGTECH

Product code:
2910105 - UNO2-PS/1AC/24DC/480W

Item status:

In stock

Origin:

Germany

Liên hệ để có giá tốt nhất:
Mr Vũ: 0908 878 633
Mr Hoàng: 0933 441 466
Mr Di: 0933 744 776
Email: info@tienhungtech.com
sales@tienhungtech.com

Product Description

BỘ NGUỒN 1 PHA 20A – 2910105 – UNO2-PS/1AC/24DC/480W POWER SUPPLY – PHOENIX CONTACT. NHÀ PHÂN PHỐI PHOENIX CONTACT VIỆT NAM. MADE IN THAILAND

Nhà phân phối Phoenix Contact Hồ Chí Minh, Việt Nam. Bộ cấp nguồn chuyển mạch sơ cấp, NGUỒN UNO, Kết nối vít, gắn ray DIN, đầu vào: 1 pha, đầu ra: 24 V DC / 20 A
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A

Tham khảo catalog chi tiết theo đường link sau ( trích nguồn https://www.phoenixcontact.com):
https://www.phoenixcontact.com/

Share products

Technical information
Download catalog

Supply system configuration Star network (TN, TT, IT (PE))
Nominal input voltage range 100 V AC … 240 V AC
Input voltage range 100 V AC … 240 V AC -15 % … +10 %
Derating < 90 V AC (1 %/V) Typical national grid voltage 120 V AC 230 V AC Voltage type of supply voltage AC Inrush current typ. 15 A (at 25 °C) Inrush current integral (I2t) < 1 A2s Frequency range (fN) 50 Hz ... 60 Hz ±10 % Mains buffering time typ. 17 ms (120 V AC) typ. 18 ms (230 V AC) Current consumption 5.4 A (100 V AC) 4.4 A (120 V AC) 2.3 A (230 V AC) 2.2 A (240 V AC) Protective circuit Transient surge protection; Varistor, gas-filled surge arrester Switch-on time typ. 1 s Device mains fuse 8 A internal (device protection), fast-blow Recommended breaker for input protection 10 A ... 16 A (Characteristic B, C, D, K or comparable) Discharge current to PE < 3.5 mA Efficiency typ. 93 % (120 V AC) typ. 94.6 % (230 V AC) Nominal output voltage 24 V DC Setting range of the output voltage (USet) 24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN) 20 A
Short-circuit-proof yes
No-load proof yes
Derating 55 °C … 70 °C
Crest factor typ. 1,667 (120 V AC)
typ. 1,75 (230 V AC)
Output power (PN) 480 W
Connection in parallel yes, for redundancy
Connection in series yes, for increased output voltage
Feedback voltage resistance ≤ 35 V DC
Protection against overvoltage at the output (OVP) ≤ 35 V DC
Residual ripple typ. 70 mVPP (with nominal values)
Control deviation < 1 % (change in load, static 10 % ... 90 %) < 3 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Rise time < 1 s (UOut = 10 % ... 90 %) Minimum no-load power dissipation < 2.9 W (120 V AC) Maximum no-load power dissipation < 3 W (230 V AC) Minimum nominal load power dissipation < 37 W (120 V AC) Power loss nominal load max. < 28 W (230 V AC)