2903147 – TRIO-PS-2G/1AC/24DC/3/C2LPS – BỘ NGUỒN TRIO 1 PHA 3A – PHOENIX CONTACT – TIENHUNGTECH

AC operation
Network type Star network
Nominal input voltage range 100 V AC … 240 V AC
Input voltage range 100 V AC … 240 V AC -15 % … +10 %
Input voltage range AC 85 V AC … 264 V AC
Electric strength, max. ≤ 300 V AC 15 s
Typical national grid voltage 120 V AC
230 V AC
Voltage type of supply voltage AC/DC
Inrush current ≤ 15 A (typical)
Inrush current integral (I2t) < 0.26 A2s Inrush current limitation typ. 15 A (after 1 ms) AC frequency range 50 Hz ... 60 Hz ±10 % Mains buffering time typ. 10 ms (120 V AC) typ. 20 ms (230 V AC) Current consumption 1.4 A (100 V AC) 1 A (120 V AC) 0.6 A (230 V AC) 0.7 A (240 V AC) Nominal power consumption 157.7 VA Protective circuit Transient surge protection; Varistor Power factor (cos phi) 0.52 Typical response time < 1 s Input fuse 6.3 A (internal (device protection)) Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K) Discharge current to PE < 0.25 mA DC operation Nominal input voltage range 110 V DC ... 250 V DC Input voltage range 99 V DC ... 275 V DC Voltage type of supply voltage AC/DC Mains buffering time > 20 ms (230 V AC)
Current consumption 0.8 A (110 V DC)
0.3 A (250 V DC)
Efficiency > 89 % (for 230 V AC and nominal values)
Output characteristic U/I with dynamic load reserve
Nominal output voltage 24 V DC ±1 %
Setting range of the output voltage (USet) 24 V DC … 28 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN) 3 A
Dynamic Boost (IDyn.Boost) 4.5 A (1 s)
Derating > 60 °C … 70 °C (2.5%/K)
Feedback voltage resistance ≤ 35 V DC
Protection against overvoltage at the output (OVP) ≤ 30 V DC
Control deviation < 1 % (change in load, static 10 % ... 90 %) < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) < 0.1 % (change in input voltage ±10 %) Residual ripple < 50 mVPP (with nominal values) Output power 72 W 108 W (1 s) Maximum no-load power dissipation < 1 W Power loss nominal load max. < 10 W Rise time ≤ 15 ms (UOUT (10 % ... 90 %)) Connection in parallel yes, for redundancy and increased capacity Connection in series yes Signal: DC OK Maximum switching voltage 30 V AC/DC Continuous load current 100 mA