2901428 – PSR-SCP-230UC/ESAM4/3X1/1X2/B – RƠ LE AN TOÀN – PHOENIX CONTACT – TIENHUNGTECH

General
Rated control circuit supply voltage US 230 V AC/DC -15 % / +10 %
Power consumption at US 2 W
Rated control supply current IS 22 mA
Voltage at input/start and feedback circuit ~ 24 V DC
Typical response time 40 ms (man. start)
Typ. starting time with Us 330 ms (when controlled via A1)
Typical release time 150 ms (when controlled via A1)
20 ms (when controlled via S11/S12 and S21/S22)
Concurrence ∞
Recovery time 1 s
Maximum switching frequency 0.5 Hz
Protective circuit Surge protection; Varistor 275 VRMS (A1-A2)
Surge protection; Varistor
Max. permissible overall conductor resistance 50 Ω
Operating voltage display Green LED
Status display Green LED

Contact type 3 enabling current paths
1 signaling current path
Contact material AgSnO2, + 0.2 µm Au
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 10 V AC/DC
Limiting continuous current 6 A (Enabling current paths)
5 A (Signaling current path)
Maximum inrush current 6 A
Inrush current, minimum 10 mA
Sq. Total current 72 A2 (ITH2 = I12 + I22 + I32)
Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
230 W (48 V DC, τ = 0 ms)
68 W (110 V DC, τ = 0 ms)
88 W (220 V DC, τ = 0 ms)
2000 VA (250 V AC, τ = 0 ms)
Maximum interrupting rating (inductive load) 48 W (24 V DC, τ = 40 ms)
40 W (48 V DC, τ = 40 ms)
35 W (110 V DC, τ = 40 ms)
33 W (220 V DC, τ = 40 ms)
Switching capacity min. 100 mW
Switching capacity (360/h cycles) 6 A (24 V DC)
5 A (230 V AC)
Switching capacity (3600/h cycles) 3 A (24 V (DC13))
3 A (230 V (AC 15))
Output fuse 10 A gL/gG NEOZED (Enabling current paths)
6 A gL/gG NEOZED (Signaling current path)